ENENUSER’S MANUAL BW
12
The next parameter is the backlight control. The standard consists in that the backlight work automatically, turning off when the scales
does not use. The backlight can be set with “EL ON”, “EL AU” (Automatic) or “EL Off”. The maximum duration of the battery achieves
when the backlight turns off.
Press the button to change the value, afterwards press the button he automatic accumulation is the following step.
With ‘’ Au On “the memory will accumulate the weight automatically, “ Au Off “will allow the manual accumulation and with”P COnt”the
RS-232 interface will send the weight continuously and the function of accumulation will be disabled
Press the button to change the value, afterwards press the button .
With ‘’ ACC ON “when you press will make the accumulation,
With “ ACC OF “only will print, without accumulation.
Press the button to change the programming, afterwards press the button .
The value of auto zero is the next. You can select between 0, 5 d, 1 d, 2d and 4 d. Press the button to change the programming,
afterwards press the button .
The unit of weight will show to continuation.
The scales are calibrated and weight in kilograms, however will show him the weight in grams, you pounds if you selects this function
Press the button to change the value, afterwards press the button when the scales was programmed to weigh with
other units of weight, the function of accumulation will continue saving the weight in kilograms.
10. CALIBRATION
10.1. CALIBRATION LINEAR
To start with the calibration, turn off the scales and go back to light it. Press and together during the initial account,
from 9 to 0 in the screen
The screen will show “unLOAD”. Unlocal all the weight of the pan and press to go back to the point zero.
The screen will show to continuation the first calibration. Put the weight on the platform and press when the scales was stable.
The scale must to be stable to accept weight. The indicator of stability will light to show that the value is stable. After completing all
the calibration of weight, press to complete the calibration. The scales will begin to explain backwards to zero after selecting
the last weight.
CALIBRATION OF WEIGHTS
SERIE BW
MODEL BW3 BW6 BW15 BW30
Weight 1 ZERO ZERO ZERO ZERO
Weight 2 1kg 2kg 5kg 10kg
Weight 3 3kg 6kg 15kg 30kg
To Next Page
Loading...
Need help?
General
