ENUSER MANUAL XTA
10
PROCECTURE:
• Load weight on the pan.
• Press
key. Zero is displayed, and tare is subtracted.
• Remove weight from the platform. Tared weight is displayed. It can set only one tare value. It can display with a minus value.
• Press
key. Zero is displayed, tare weight is cleared.
6.4 WEIGHING GOODS
• Place goods to be weighed on the platform.
• Wait few seconds for stability display.
• Read the result.
• Avoid overloading. When display appears “ol” reduce the load or unload.
6.5 UNIT PRICE SETTING
• Make sure platform is empty and display is zero
Weight
0 000
Unit price
0 000
Total price
0 000
• Place goods to be weighed on the platform.
Weight
0 175
Unit price
0 000
Total price
0 000
• Enter the unit price by pressing numeric keys. Total price will be calculate automatically.
Weight
0 175
Unit price
5 000
Total price
0 88
6.6 UNIT PRICE MEMORY
XTA & XTA-P can store 10 unit price values. It can select from 0 to 9 numeric keys.
SAVE TO MEMORY
• By pressing numeric keys enter the unit price, for example, 10.
Weight
0000
Unit price
10
Total price
0
• Press and hold PLU, display will be shown.
To Next Page
Loading...
