EasyManua.ls Logo

Bazzaz ZFi - Rear Injector Connection; Neutral Sensor Connection

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.4
1. Locate the factory rear injector near the back of the airbox.
2. Disconnect the factory injector connector and install the Bazzaz injector
connectors inline.
BAZZAZ
FACTORY
5>CONNECT (CONT.)
5.5
1. Locate the factory neutral sensor, which can be found on the back side of the motor
on the right hand side near the exhaust.
2. Use the supplied scotchlok to crimp onto the yellow/green wire and connect the
Bazzaz neutral connector.
BAZZAZ
FACTORY