BCS PowerSafe 770HY - Maintenance Guide; Storage

BCS 770HY Two Wheel Tractor Power Unit
TWT770HY/PU/0221 Page 19
For engine maintenance please refer to engine manufacturers manual.
Aer every hour of operaon stop the engine and remove the spark plug cap.
Check engine oil level (recommended oil SAE 15w/40).
Replace the spark plug cap.
Do not turn the machine on its side for cleaning.
Before checking the oil level ensure the machine is level.
Remove the gearbox unit dipsck and ensure the oil reaches the top level mark, if necessary top up with
SAE 15w/40 gear oil (see page 20).
If the machine is not be used for a long period of me it is advisable to take the following precauons:
• Empty the carbureor and fuel tank (refer to engine manual for details). Alternavelty, add a fuel
stabiliser.
• Empty the engine of oil.
• Petrol engine: lubricate the cylinder with a few drops of engine oil through the plug hole then turn
the engine over several mes without starng it.
• Diesel engine: remove the injector by unscrewing the two bolts which fasten it to the head and
pour a lile oil into the hole.
• Clean the engine and the machine thoroughly.
When restarng check that all security devices are working.
Maintenance Guide
Storage