BCS PowerSafe 770HY - Troubleshooting Guide

BCS 770HY Two Wheel Tractor Power Unit
TWT770HY/PU/0221 Page 23
Troubleshoong Guide
PROBLEM POSSIBLE CAUSE REMEDY
Unable to select gear
Pressure washing has removed
lubricaon of gear lever detent
ball.
Grease the detent ball and
quadrant.
Unable to pull engine over
Machine has been pped on side
for cleaning and engine oil has
lled the cylinder bore causing a
hydraulic lock.
Remove spark plug and air lter.
Stand to one side and pull over
engine to clean out oil. Change
engine oil and air lter. Clean spark
plug.
No drive to wheels or
working implement
Check gearbox oil level.
Top up if necessary with SAE
15w/40 oil (see page 20).
Cable adjustment required.
See OPC Operang Cable
Adjustment on page 24 for details.
Engine smokes
There may be petrol in the engine
oil due to fuel tap being le on
during transportaon.
Change engine oil.
Contaminated air lter. Replace element.