TP/TA User Guide 13
10 Active Current sense level
This is the current level to the power tool where TP/TA identifies that the power
tool is turned on.
This current level may vary between power tools and therefore the Current Sense
Level is set by means of the Sensitivity Control and the Activity LED.
CAUTION
TP/TA senses the magnetic field resulting from current flow in the power cable to
which it is attached.
TP/TA can be affected if it is mounted too close to motors, transformers or other
devices which produce magnetic fields.
Normally a 12” to 18” distance is sufficient to avoid problems.
It is easy to see if there is magnetic interference. With the TP/TA in OFF mode
and the power tool OFF the LED will flash if there is interference.
To Next Page
Loading...