TP/TA User Guide 3
2. General Description of ‘iVAC Pro System’
The ‘iVAC Pro System’ consists of two groups of products.
The first group consists of units that transmit information and a second group of
units that receive the transmitted information. At the present time the first group
that transmit information are the ‘iVAC Pro Remote’ and two versions of the
‘iVAC Pro Tool’ units - TP and TA.
The units that receive the information are the ‘iVAC Pro Switch’, “iVAC Pro
MSC’, “iVAC Pro MSC Advantage” which control the Dust Collectors and the
‘iVAC Pro Blast Gate’.
The ‘Tool’ units monitor the status of their associated power tools. When the
power tool turns on it sends a digital wireless signal instructing the ‘iVAC Pro
Switch’, “iVAC Pro MSC” or “iVAC Pro MSC Advantage” to turn on the Dust
Collector and the ‘iVAC Pro Blast Gate’ to open. The following discussions relate
to communications with an ‘iVAC Pro Switch’ although the same actions/response
apply to the ‘iVAC Pro Blast Gate’.
This User Guide will focus on TP and TA.
To Next Page
Loading...