TP/TA User Guide 2
Table of Contents
1. Warnings
Please read the operating instructions before use.
TP/TA is intended for indoor use, in dry locations only.
TP/TA is powered from an AC to DC 5V USB adapter.
The USB Adapter should only be connected to AC mains circuits at the rated volt-
age.
1 Warnings.
2 General Description of ‘iVAC Pro System’
3 ‘iVAC Pro Tool Plus/Tool Advantage’
4 Physical Features
5 Modes of Operation
6 Program Switch
7 System Address
8 Multi Tool Operation
9 Tool Address
10 Active Current sense level
11 Sensitivity Adjustment
12 System Test
13 ‘Tool Plus/Tool Advantage’
Features
14 Specifications
15 Regulatory Compliance
16 Warranty
17 Contact
To Next Page
Loading...