28 | BDIUSA.COM CORRIDOR L-DESK 6531
The doors on your cabinet should be evenly
spaced and the doors should open and close
freely without rubbing against the door frame. If
the cabinet’s doors appear out of alignment, this
condition can be corrected with minor adjustment
to the European hinges on each door. Because
these hinges are adjustable, adjusting one hinge can sometimes cause the need for adjustments to
other hinges. But with a few adjustments, you can modify the orientation of the cabinet doors to
make sure that they hang perfectly within your cabinet.
Use a (T1) Phillips Screwdriver to adjust the door hinges:
n By adjusting Screw 1, the door will move LEFT or RIGHT within the frame. Make minor
adjustments at both top and bottom hinges for best results.
n By loosening both Screws 2 on both hinges, the door can move UP or DOWN. Retighten the screws.
n By adjusting Screw 3 the entire door will move IN or OUT, opening or closing the gap between
the door frame and cabinet. (This screw rarely needs adjustment.)
1 2 3
ADJUST DOOR HINGES (IF NEEDED)FINE TUNING
PART/DESCRIPTION QTY
T1-PHILLIPS
SCREWDRIVER
1
To Next Page
Loading...
