Before using for the rst time
MAB 480
15
Before using for the rst time
Transport inspection
The machine is supplied as standard with the components indi-
cated in chapter Components/scope of supply.
NOTE
► Inspect the delivery for completeness and obvious signs of
damage. Report an incomplete or damaged delivery to your
supplier/dealer immediately.
Preparations
This chapter contains important instructions for the necessary
preparations before starting work.
Additional safety measures for certain operations
Additional safety precautions must be taken for the following
operations with the machine:
Non-horizontal working position
WARNING
Risk of injury from the falling machine.
When working in inclined or vertical position and during over-
head work, the machine must be secured to prevent it from
falling using the safety chain (D) supplied.
► Check the safety chain for proper function before every use.
A damaged safety chain must not be used. Replace a dam-
aged safety chain immediately.
► Attach the safety chain in such a way that the machine
moves away from the operator in the event of slipping.
► Lay the safety chain as tightly as possible around the handle
of the machine.
► Check the secure tting of the safety chain and lock before
starting work.
► Use the protective equipment stipulated in chapter Personal
protective equipment.
To Next Page
Loading...
