32
COMMISSIONING
BEFORE INITIAL COMMISSIONING
Unpacking the device
1.
Open the box and remove the appliance.
2.
Remove the packaging completely from the device.
3.
Unwind the power cable completely, taking care
not to damage it.
Transport rollers
The appliance is equipped with transport castors for easier transport.
In addition, two castors are equipped with a parking brake to guarantee
a firm stand.
1.
After you have carefully unpacked the appliance, insert the
transport castors into the notches provided on the underside of the
appliance.
2.
To set the parking brakes, operate the levers as follows:
PRESS DOWN Fixing the brake
RELEASE PRESSURE Releasing the brake
INSTALLATION
Please note the following points during installation:
1. Place the appliance on a level and firm surface and set the parking
brakes so that the appliance is stable.
2. The distance to walls or other objects must be at least 50 cm.
3. Before using the appliance, make sure that both the air inlet and
the air outlet are free of obstacles and not blocked.
4. Connect the appliance to an earthed socket.
FILL WATER TANK
Please note the following when filling the water tank:
To Next Page
Loading...
