Be Cool BC63AC2301IKF - Remote Control Operation; Cooling Function Activation; Timer Setting

37
COOLING FUNCTION
• Use the button to start the cooling function.
• As soon as the function is activated, the respective indicator lights up.
• The appliance now starts to pump water out of the water tank to
produce cold air, which is then blown out of the appliance. The colder
the water in the tank, the cooler the air that flows out of the appliance.
NOTE
Make absolutely sure that the water level indicator is above the MIN.
If the speed is set to MID, HIGH or TURBO when cooling mode is activated,
the fan runs at LOW for 30 seconds and then continues to operate at the
previously set speed level.
TIMER
• Use the button to switch off the appliance on a timed basis.
• Each time you press the timer button, the operating time is gradually
extended by one hour - pay attention to the hour shown in the centre
of the display:
Press 1x
1 hour
Display 1H
Press 2x
2 hours
Display indication 2H
Press 3 times
3 hours
Display 1 & 2H
..
..
..
Press 7x
7 hours
Display indication 4, 2, 1H