Be Cool BC63AC2301IKF - Remote Control Operation; Power Off Procedure; Fan Speed Adjustment; Swing Function Control

36
NOTE
Never switch off the air cooler by pulling the plug directly from the mains. To
switch off, always press the ON/OFF button and wait a few minutes before
disconnecting the appliance from the mains. This allows the appliance to run
through a cycle of checks to verify its functionality.
SET SPEED
• Use the button to set the speed of the fan.
• The respective indicator lights up:
Press 1x
Medium speed
MID LED lights up
Press 2x
High speed
HIGH LED lights up
Press 3 times
Turbo mode
TURBO LED lights up
Press 4x
Low speed
LOW LED lights up
SWING
• Use the button to activate the swing function of the device.
• When the function is activated, the SWING LED lights up.
• Press the button again to deactivate the function.