Seite 23 von 40
STARTUP
PREPARING FOR USE
IMPORTANT!
Leave the device in an upright position for at least 2 hours before starting it up for the first
time and make sure the condensation water outlet is well sealed.
Place the device on a level surface close to a window and a grounded outlet.
It must be at least 50 cm away from walls and other objects.
Prior to using the device make sure that both air inlet and air outlet are free from items
and not blocked.
Observe the instructions in the chapters “Important information on safety, location and
electrical connection”.
INSTALLATION
You can start your air conditioning unit up after following a few simple steps:
1. Prepairing the Exhaust hose
First connect the adapter for the air conditioner
to one side of the exhaust hose. Then connect
the adapter for the window on the other side.
2. Installing the air hose on the device
Screw the air hose into the designated opening
on the back of the device.
To Next Page
Loading...
