Seite 28 von 40
2. Programmed deactivation
When the device is switched on push the „TIMER“-Button.
With the and buttons you can set the desired time (0-24 hours). The indicator
light for “TIMER” is lighting up.
The device automatically switches off once the set time has elapsed.
SWING
This functions blows the air tot he left and right. This allows you to achieve a horizontal air
distribution in the room
First set the desired mode.
Push the SWING-button.
By pressing the SWING-button again, the function stops and the slats remain in the
respective position.
SLEEP
This feature is especially useful for operating the device during the night, as it gradually
reduces its performance.
While the unit is in the COOLING-Mode, press the „SLEEP“-Button.
When the mode is active, the indicator lights up.
By pressing the „SLEEP“-Button again the function stops.
NOTE
When the sleep function is active, the setpoint temperature increases by 1°C after on hour
and by 1°C after two hours for your comfort.
To Next Page
Loading...
