230W moving head beam light user manual
1. Attention and installation
1.1 Instruction
Thank you for using our company's products.When the product leaves the factory,
the performance is good condition and the packing is complete. For your own
safety,please read this user manual carefully before installing the device.This manual
covers the important information of installing and using, please install and operate
following the manual book .meanwhile,please keep this manual for using an anytime.
My company disclaims all liability for damage to the fitting or to other property or
persons deriving from installation, use and maintenance that have not been carried out
in conformity with this user manual, which must always accompany the fitting.
This manual is subject to technical changes without prior notice.
1.2 Maintenance
Disconnect from mains before starting maintenance operation.
The lamps should be kept dry to avoid working in wet environments.
Intermittent use would effectively extend the lamp life.
In order to obtain good ventilation and lighting effects,to pay attention to regular
cleaning fan,fan network,and lens.
Don't use alcohol and other organic solvents to clean the housing,so as to avoid
injury.
1.3 Attention
This lighting fixture is for professional use only.
Ensure that the power source has a proper ground connection before using the
lamp.
Don't place this product in a place that is easy to loosen or vibrate.
In the process of using, if the lamp is abnormal, stop using the lamp in time.
In order to ensure the service life of the product, the product should not be placed
To Next Page
Loading...
