Beam i580 - Volume Lock; Enabling Volume Lock; Disabling Volume Lock

Use this feature to lock a device to the remote’s volume control. For
example, the remote can be in TV mode while the volume buttons
control your sound bar.
Enabling Volume Lock:
1. Press and hold the PROGRAM button until the POWER button lights
up red. The POWER button’s red indicator light remains on.
2. Select a device from DEVICE CATEGORIES that you want to lock to
the remote’s volume control. The POWER button’s red indicator
light blinks once and remains on.
3. Press the VOL+ button. The POWER button’s red indicator light blinks
once and remains on.
4. Press the OK button. The POWER button’s red indicator light will
blink twice and turn off.
Disabling Volume Lock:
1. Press and hold the PROGRAM button until the POWER button lights
up red. The POWER button’s red indicator light remains on.
2. Press the VOL- button. The POWER button’s red indicator light blinks
once and remains on.
3. Press the OK button. The POWER button’s red indicator light will
blink twice and turn off.
NOTE: On most newer HDMI-connected devices, the Volume Lock feature
may be unnecessary as this feature is already built-in.
VOLUME LOCK
20