Beam i580 - Channel Lock; Enabling Channel Lock; Disabling Channel Lock

Use this feature to lock a device to the remote’s channel control. For
example, the remote can be in TV mode while the channel buttons
control your satellite or cable box.
Enabling Channel Lock:
1. Press and hold the PROGRAM button until the POWER button lights
up red. The POWER button’s red indicator light remains on.
2. Select a device from DEVICE CATEGORIES that you want to lock to
the remote’s channel control. The POWER button’s red indicator
light blinks once and remains on.
3. Press the CH+ button. The POWER button’s red indicator light blinks
once and remains on.
4. Press the OK button. The POWER button’s red indicator light will
blink twice and turn off.
Disabling Channel Lock:
1. Press and hold the PROGRAM button until the POWER button
lights up red. The POWER button’s red indicator light remains on.
2. Press the CH- button. The POWER button’s red indicator light blinks
once and remains on.
3. Press the OK button. The POWER button’s red indicator light will
blink twice and turn off.
NOTE: On most newer HDMI-connected devices, the Channel Lock feature
may be unnecessary as this feature is already built-in.
CHANNEL LOCK
21