33
be made for testing returned product which is not
defective or is found to be defective as the result of
improper use, maintenance or neglect.
7. Beam Communications will not accept responsibility
for any invoiced goods or services that are not
covered by a Beam Communications written
purchase order. Under no circumstances does
Beam Communications agree to pay for labor
or other related expenses associated with the
troubleshooting and/or repair of our product
without prior specic written authorization.
8. Information in our descriptive literature is based
on product specications that are current at the
time of publication. Product specications, designs
and descriptive literature are subject to change
as improvements are introduced. Although we
announce changes as they occur, we cannot
guarantee notication to every Customer. Beam
Communications warrants delivered product to
conform to the most current specications, designs
and descriptive literature.
9. This warranty policy may be expanded or limited, for
particular categories of products or Customers, by
information sheets published as deemed appropriate
by Beam Communications. In particular, the warranty
for third party Products is that of the third party and
not Beams warranty.
3. Beam Communications will correct any defects
in material or workmanship of products
manufactured by Beam which appear within twelve
(12) months, from the date of shipment by Beam
Communications to the Customer. Exception to a
12 months warranty are:
• Units that they do not carry a transceiver (24
months warranty)
• Accessories (3 months warranty)
Please note that antennas and products not
manufactured by Beam (like; NAL Shout Nano,
Man down Kit, RST970, 9522B and 9602) also come
with a 12 month warranty. Beam Communications
will repair or replace, at our option, any defective
product, provided that our analysis and/or
inspection disclose that such defects developed
under normal and proper use.
4. This warranty does not extend to goods subjected
to liquid or particulate ingress, extreme humidity,
misuse, neglect, accident or improper installation,
or to maintenance or repair of products that have
been altered or repaired by anyone except Beam
Communications unless otherwise stated in writing.
If a product has been tampered with (e.g. warranty
seal has been removed, wrong cable has been used
with an antenna), the warranty will be void.
5. The warranty is a return-to-base warranty and
freight is paid by the sender.
6. A charge of USD$195.00 including return freight will
Beam Warranty Terms
& Conditions
Beam Communications gives this express warranty (along
with extended warranty endorsements, where applicable) in
lieu of all other warranties, express or implied, including
(without limitation), warranties of merchantability and tness
for a particular purpose. This constitutes our sole warranty
and obligation with regard to our products as well as the
Customer’s sole remedy.
Beam Communications expressly disclaims all liability and
responsibility for any special, indirect or consequential
damages or any further loss of any kind whatsoever resulting
from the use of our product(s). The Customer’s sole and
exclusive remedy and the limit of Beam’s liability for any loss
whatsoever, shall not exceed the purchase price paid by the
Customer for the product to which a claim is made.
All products manufactured by Beam Communications
are warranted to be free from defects in material and
workmanship in accordance with and subject to the following
terms and conditions:
1. This warranty is limited to the original Customer
only. It cannot be transferred or assigned to third
parties unless the intent to transfer to a third party
is expressly indicated in a purchase order and/
or warranty-processing arrangements have been
agreed upon in writing by Beam.
2. Beam Communications does not warrant any
installation, maintenance or service of the Products
not performed by Beam, nor does it warrant the use
of Products with unapproved ancillary products.
To Next Page
Loading...