Beamz PROBEAM7R - Prism, Frost, and Focus Control; Reset, Lamp, and Expand Channels; Maintenance and Care; Fuse Replacement Procedure

4. General Maintenance
a. Unscrew the fuse holder and remove the damaged fuse.
b. Replace with the same type fuse (F7A/250V) and screw fuse holder back in its place.
4.1 Fuse Replacement
9
EFFECT
NAME FUNCTIONSCH
5 PRISM
8 FROST
6
PRISM
ROTATION
VALUE
0-127
128-255
0-127
128-191 Counter-clockwise rotation from fast to slow
Clockwise rotation from slow to fast192-255
No function
0-255 Frost 0 - 100%
9 FOCUS 0-255 Focus from far to near
Angle 0 - 400°
8-facet prism
RESET & LAMP
NAME FUNCTIONSCH
15 RESET
16 LAMP
VALUE
0-127
128-200
201-255
0 - 9
Turn lamp on
（
over 3 seconds
）
10-100
No function
No function
No function
101-255
Turn lamp off
（
over 3 seconds
）
Reset
（
over 3 seconds
）
EXPAND CHANNELS
NAME FUNCTIONSCH
17 GOBO SPEED
VALUE
0-255
0 - 049
Pan Auto050-099
Gobo wheel speed from fast to slow
18 COLOR SPEED
0-255 Colour wheel speed from fast to slow
19
20 RUN MODE
FOCUS SPEED
0-255 Focus speed from fast to slow
DMX mode
100-149 Tilt Auto
150-199 Auto mode
200-255 Sound mode
4 GOBO
220-224 Gobo 11 shaking from slow to fast
225-229 Gobo 12 shaking from slow to fast
230-234 Gobo 13 shaking from slow to fast
235-239 Gobo 14 shaking from slow to fast
240-244 Gobo 15 shaking from slow to fast
245-249 Gobo 16 shaking from slow to fast
250-255 Gobo 17 shaking from slow to fast