Beamz PROBEAM7R - Product Specifications and Setup; Technical Data; Product Overview; Mounting Guidelines

2
The Moving Head is fully operational in any mounting position, hanging upside-down,
side mounted, or set on a flat llevel surface, etc.
1.3 Technical Data
1.4 Product overview
2. SETUP
2.1 Mounting
▪
Power supply: AC 100-240V 50-60Hz
▪
Power consumption: 350W
▪
Lamp: OSRAM 7R 230W lamp, 8,000K, 2,000 hrs
▪
Beam angle: 0-4° adjustable
▪
1 Colour wheel: 14 COLOURs + white
▪
1 Gobo wheel: 17 fixed gobos + open
▪
Colour rainbow + Gobo shaking
▪
8-facet rotating prism
▪
Motorized focus
▪
Frost-filter
▪
DMX-controlled or stand-alone with master/slave
▪
2 DMX modes: 16ch (Simple)/20ch (Expand)
▪
Pan : 540° (16 bit) Tilt: 270° (16 bit)
▪
Automatic Pan/Tilt correction
▪
Mechanical shutter and adjustable speed strobe effect
▪
Touch LCD display with Joy Wheel
▪
Dimension: 523×337×511mm
▪
Weight: 19.5 kg
IMPORTANT!!! Safety cables must
always be used when unit is celling
or truss mounted. The safety cable
must be capable of holding 10
times the weight of the fixture. The
equipment must be installed by
professionals.
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
DANGER OF FIRE!
DMX In/Out Power On/Off Power In/Out
Fuse
LCD Display Joy Wheel