What to do if I forgot my BEC Wireless Router password?
If you've forgotten your login username or password for your BEC Wireless Router, first try the default username "admin" and password "admin". If that doesn't work, restore the router to its factory settings by pressing the reset button on the rear side of the device.
Why can't I PING any PC on LAN using my BEC MX-210NP?
If you cannot PING any PC on your LAN with your BEC Wireless Router, check the Ethernet LEDs on the front panel. The LED should be lit for the port with a PC connected. If it's not lit, ensure the cable between your router and the PC is properly connected. Also, make sure you have uninstalled your firewall program before troubleshooting. Verify that the IP address and the subnet mask are consistent for both the router and the workstations.
General| Frequency Bands | 2.4 GHz |
|---|---|
| Maximum Wireless Speed | 300 Mbps |
| Ethernet Ports | 4 x 10/100 Mbps |
| Security Protocols | WEP, WPA, WPA2 |
| Device Type | Wireless Router |
| Ports | 4 x LAN, 1 x WAN |
| Antenna Type | 2 x External |
| WAN Port Type | 10/100 Mbps |
| Wireless Standard | IEEE 802.11b/g/n |
To Next Page
