r Inhibiting the transmit mode for one or more
memory channel
Call up function SF 10 using the MDE key (4). The following displays
appear :
left LC display (7) SF 10
right LC display (8) CH channel number
Using the kHz (10) (steps of 1) or MHz (9) (steps of 10) switch, select
the desired channel for inhibiting the transmit mode. Store the channel
by pressing the STO key (3). Several channels can be selected on
priority channels. When the STO key (3) is pressed again, the inhibiting
transmit mode is canceled.
r FSqL
no function
Issue 10/95 Page 27
Becker AR 3209
To Next Page
Loading...
