Becker AR 3209 - Controls and Indicators

CONTROLS AND INDICATORS
Function of controls and indicators
1 ON/OFF rotary switch Adjustment of volume.
2 Squelch key Switching the squelch on or off.
3 Store key Storage of set frequency or other
settings.
4 Function key Selection of mode.
Page 8 Issue 10/95
Operating Instructions
1
2
3
4
6
8
9
10
5
7
OFF = The storage of frequencies in the individual channels is
not possible. The VHF transceiver can only work on
the
set frequency.
ON = Storage of frequencies in the individual channels is
possible (standard setting)
r Erase stored frequencies
Call up function SF 7 using the MDE key (4). The following displays
appear :
left LC display (7) SF 7
right LC display (8) CH channel number
Select the channel to be erased using the kHz (10) (steps of 1) or MHz
(9) (steps of 10) switch. The stored frequency is erased by pressing the
STO key (3). The channel No. 1 cannot erased.
r Entry of password to interlock the equipment configuration
Call up the COdE function using the MDE key (4). The following
displays appear :
left LC display (7) COdE
right LC display (8) 0
Issue 10/95 Page 25
Becker AR 3209