To Next PageTo Next Page
Need help?Do you have a question about the Becker AR6201 and is the answer not in the manual?
General| Brand | Becker |
|---|---|
| Model | AR6201 |
| Category | Transceiver |
| Language | English |
Overview of the manual's scope and how to use it.
Explains the function and application of the 620X transceivers.
Clarifies terminology used in the document regarding frequency and channels.
Details the meaning of suffixes in part numbers for different configurations.
Brief descriptions of the AR6201, RT6201, RCU6201, and AR6203 units.
Briefly lists key features like frequency indication and display.
Detailed technical specifications including power, general data, dimensions, receiver/transmitter, emergency, software, hardware, compliance.
Lists environmental test conditions and performance standards met by the units.
Outlines restrictions and guidelines for installing the AR620X.
Instructions for inspecting and preparing the equipment before installation.
Covers the physical mounting procedures for the AR6201, RCU6201, AR6203, and RT6201 units.
Details connectors, pin assignments, and inputs/outputs for system interfaces.
Lists the minimum required equipment for connecting and configuring transceivers.
Provides recommendations for installing the VHF antenna and placement.
Guides on how to set up equipment configuration on the ground.
Lists the default settings for various parameters of the transceiver.
Presents typical installation configurations and wiring diagrams for various aircraft types and seating arrangements.
Discusses retrofitting AR4201 units with AR620X, including pin compatibility.
Outlines procedures for verifying system functionality, including mechanical, electrical, performance, and flight tests.
Provides solutions for common problems encountered with the transceiver.
Defines maintenance as "on condition" and recommends frequency accuracy checks.
Provides general operating instructions and safety precautions for the transceiver.
Identifies and explains the function of controls, indicators, and display symbols.
Details the procedure for powering on the transceiver and the PBIT process.
Explains how the transceiver operates in receive and transmit modes.
Details the different modes for selecting operating frequencies: Standard, Direct Tune, Channel, and Scan.
Details how to control squelch to mute receiver noise.
Explains the indicators for received signal strength.
Describes how to select between 8.33 kHz and 25 kHz channel spacing.
Explains manual and automatic storage of VHF frequencies.
Details connecting and using external audio sources.
Explains how the intercom system works for internal communication.
Covers operation of VOX and speaker settings.
Guides on accessing and adjusting intercom and pilot menu settings.
Lists and explains various warning and failure messages displayed by the unit.
