Becker centronic sunwindcontrol swc52 - Page 49

fr
en
de
nl
49
FUNCTION
(Only if the operating device has been removed. To be carried out by qualied
staff only!)
INITIAL OPERATION, RELAY, TOTAL RUNNING TIME
(Date of initial operation, relay switching rate, total running time)
1. You have conrmed the function ALARM SIGNAL ON/OFF. BLOCKING
TIME/SWITCHING TIME appears.
2. Use the +/- button to choose between BLOCKING TIME/SWITCHING TIME.
3. Press OK to conrm your selection. EXPERT MODE OFF/ON appears.
4. Use the +/- button to make the desired setting.
5. INITIAL OPERATION appears.
6. Press OK to conrm. RELAY appears.
7. (RELAY refers to the relay switching rate.)
8. Press OK to conrm. TOTAL RUNNING TIME appears. (TOTAL RUNNING
TIME refers to the total switching time of the relays.)
9. Press OK to conrm.
10. Press the MENU button to return to operating mode.