Beckett CF800 User Manual

COMMERCIAL PRODUCTS
Potential for Fire, Smoke and Asphyxiation Hazards
To the Homeowner or Equipment Owner:
Please read and carefully follow all instructions
provided in this manual regarding your
responsibilities in caring for your heating
equipment.
Contact a professional, qualifi ed service agency for
installation, start-up or service work.
Save this manual for future reference.
y
y
y
Incorrect installation, adjustment, or misuse of this burner could result in death, severe
personal injury, or substantial property damage.
To the Professional, Qualifi ed Installer or Service Agency:
Please read and carefully follow all instructions provided
in this manual before installing, starting, or servicing this
burner or heating system.
The Installation must be made in accordance with all state
and local codes having jurisdiction.
y
y

Beckett CF800 Specifications

General

Brand	Beckett
Model	CF800
Category	Burner
Language	English

Summary

General Information

Hazard Definitions

Defines DANGER, WARNING, CAUTION, NOTICE for safety.

Pre-installation Checklist

Professional Installer/Service Agency Responsibility

Combustion Air Supply

Ensures adequate airflow for safe operation.

Fuel Supply

Covers oil supply, pressure, and piping.

Nozzle Pressure

Discusses required nozzle pressure and its impact.

Vent System

Stresses the importance of a proper vent system.

Mount the Burner

Install Nozzle

Check Electrode Settings

Ensures correct electrode gap and position.

Set Dimension Z

Oil Supply/Return Lines

Wire the Burner

Wiring the Burner

General instructions for electrical connections.

Typical Burner Sequence of Operation - 7505 Control

Typical Burner Sequence of Operation - R7184P Control

Prepare the Burner for Start-up

Start-up Checklist

Items to verify before initiating burner start-up.

Initial Air Settings

Set Appliance Limit Controls

Instructions for setting safety limit controls.

Prepare the Fuel Unit for Air Venting

Start the Burner

Starting the Burner and Venting Air

Procedures for priming the pump and venting air.

Resetting From Restricted or Hard Lockout

Procedures for resetting safety lockouts.

Set Combustion Using Instruments

Steps for adjusting combustion for optimal performance.

Maintenance and Service

Annual Service by Qualified Service Technician

Tasks for yearly professional maintenance.