What to do if I get errors related to the signal amplitude on Beckhoff AX5000?
If you encounter errors related to the signal amplitude on your Beckhoff Servo Drives, check the wiring of the sine/cosine signals.
How to troubleshoot feedback errors related to the digital signals on Beckhoff AX5000 Servo Drives?
To troubleshoot feedback errors related to the digital signals on your Beckhoff Servo Drives, double-check the wiring and the number of position bits.
General| Control | EtherCAT |
|---|---|
| Protection Class | IP20 |
| Feedback | Resolver, EnDat, Hiperface, SSI |
| Safety | STO (Safe Torque Off) |
| Relative Humidity | 5% to 95%, non-condensing |
| Certifications | CE, UL, cUL |
| Operating Temperature | 0…+45 °C |
Specifies the required qualifications for personnel working with the AX5000 servo drive.
Highlights critical safety notes regarding DC link capacitors and hot surfaces.
Information on UL-Listing for AX5000 drives and specific UL-related requirements.
Explains the structure and meaning of the AX5000 servo drive type code.
Presents detailed technical specifications for ambient and operating conditions.
Details the various connectors and terminal points on the servo drive.
Covers mechanical aspects of installing the servo drive, including ventilation and clearances.
Details the procedures and safety precautions for electrical installation of the AX5000.
Identifies potential causes for uncontrolled movements during commissioning and related checks.
To Next Page
