Need help?Do you have a question about the Beckhoff BK3 0 Series and is the answer not in the manual?
General| Protection Class | IP 20 |
|---|---|
| Power Supply | 24 V DC |
| Current Consumption | Typically 70 mA |
| Operating Temperature | 0°C to +55°C |
| Storage Temperature | -25°C to +85°C |
| Relative Humidity | 95%, non-condensing |
Provides an overview of Bus Couplers for PROFIBUS DP, listing compatible models.
Details intended audience, disclaimer, and trademarks for the document.
Outlines safety regulations, exclusion of liability, and instruction descriptions.
Lists changes and updates across different document versions.
Presents detailed technical specifications for specific Bus Coupler models.
Provides specific technical data and specifications for the BK3150 Bus Coupler.
Details technical specifications for BK35x0 Bus Couplers using optical fiber connections.
Explains the architecture and features of the Beckhoff Bus Terminal system.
Introduces PROFIBUS DP and DPV1 protocols and their basic concepts.
Guides on preventing electrostatic discharge damage to components during handling.
Details physical dimensions and mounting procedures onto standard DIN rails.
Covers connection system options, wiring procedures, and power supply.
Outlines special conditions for using components in potentially explosive areas.
Describes the self-test and initialization process of the Bus Coupler upon power-up.
Explains configurable settings within the Bus Coupler's UserPrmData for customization.
Summarizes technical data across various Bus Coupler models in a comparative table.
Guides on configuring CfgData, modules, GSD files, and using software tools.
Explains how process data is exchanged and mapped in the Bus Coupler's process image.
Details the configuration of K-bus cycles, including modes like FreeRun and Synchronous.
Describes the DPV1 interface for acyclic data transfer and module assignment.
Covers firmware information, terminal composition, K-bus status, and cycle time.
Explains the meaning of various LEDs on the Bus Coupler for status and error indication.
Describes DP standard and device-specific diagnostic data and how it's reported.
Lists and explains common errors occurring during the DP start-up phase, including error codes.
Covers K-bus errors, interruptions, and terminal diagnostics for fault identification.
Details the 2-byte PLC interface and word alignment for process image organization.
Explains deactivating CfgData check and using multi-configuration mode.
Details how to adjust the maximum lengths of DP buffers for data transfer.
Discusses multi-configuration mode for production machines and version compatibility.
Specifies environmental conditions and protection classes required for flawless operation.
Lists product approvals and certifications, including UL and CE marks.
Provides references to related standards, books, and defines common abbreviations.
Offers information on obtaining technical support, service, and contact details for Beckhoff.
To Next Page
