Need help?Do you have a question about the Beckhoff CX5120 and is the answer not in the manual?
General| CPU Cores | 2 |
|---|---|
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Processor | Intel Atom |
| RAM | 2 GB |
| Operating System | Windows 10 IoT Enterprise |
| Ethernet Ports | 2 x 10/100/1000 Mbps |
| USB Ports | 2 x USB 2.0 |
| Operating Temperature | -25 °C to +60 °C |
| Certifications | CE, UL |
Guidance on document usage, safety, and applicable standards.
Critical safety regulations, liability exclusion, and safety symbol explanations.
Records changes and version history of the manual.
Describes the CX51x0 series as a modular control system for top-hat rail mounting.
Explains the CX51x0 architecture, EtherCAT, PLC, Motion Control, and visualization features.
Detailed technical specifications for the CX5120 model, including hardware and performance.
Detailed technical specifications for the CX5130 model, including hardware and performance.
Detailed technical specifications for the CX5140 model, including hardware and performance.
Lists available CX51x0 module variants with different CPU, memory, and software options.
Illustrates and details the internal architecture of CX51x0 Embedded PCs.
Instructions for accessing, replacing, and maintaining the system's backup battery.
Procedures for accessing and replacing the CFast card for storage and OS.
Recommendation for using specific CFast cards for optimal system operation.
Introduces the built-in one-second UPS for securing persistent data during power loss.
Details the S-UPS library, function blocks, and functions for PLC integration.
Describes the F_GetVersionTcSUPS_CX51x0 function for retrieving library version info.
Defines the S-UPS modes (E_S_UPS_Mode) and states (E_S_UPS_State) for control and status.
Guidelines for safely unpacking, installing, and transporting the CX51x0 modules.
Provides dimensional drawings for CX5120, CX5130, and CX5140 models.
Step-by-step instructions for mounting CX51x0 units onto a DIN rail.
Details power supply requirements, connections, and wiring for the CX51x0 system.
Illustrates correct and incorrect mounting of passive terminals to the power supply unit.
Describes the DVI-I interface for display connection, pinout, and resolution limits.
Details the four USB 2.0 interfaces, pin assignments, and power output specifications.
Explains the two Gigabit Ethernet ports, their LEDs, and RJ45 pin configurations.
Describes the RS232 interface, pinout, baud rate, and driver support limitations.
Details the RS422/RS485 interface, pinout, and default parameter settings.
Guidance on accessing and configuring BIOS settings, emphasizing qualified personnel.
Instructions for configuring EtherCAT cable redundancy using dual Ethernet ports.
Steps for adding and configuring the CX51x0 with TwinCAT 2 and TwinCAT 3.
Procedures for safely powering the CX51x0 system on and off.
Overview of the basic CPU module's functionality and status indicators.
Lists common faults, their causes, and corrective measures for the CX51x0 system.
Instructions for safely dismantling and disposing of the CX51x0 hardware configuration.
Lists available accessories such as CFast cards, adaptors, and spare parts.
Details the compliance certifications (CE, UL, FCC) for the CX51x0 Embedded PC family.
Provides contact information for Beckhoff technical support and service.
To Next Page
