Need help?Do you have a question about the Beckhoff CX1020 Series and is the answer not in the manual?
General| Brand | Beckhoff |
|---|---|
| Model | CX1020 Series |
| Category | Industrial PC |
| Language | English |
Guidance on using the manual and following essential notes and explanations.
Ensures responsible staff meet safety requirements and outlines disclaimer for documentation.
Ensures compliance with all safety laws, regulations, guidelines, and standards.
Specifies that the documentation is for trained specialists familiar with national standards.
Explains the meaning of safety symbols (Danger, Warning, Note) used in the manual.
Details operator responsibilities like intended use, maintenance, and personnel authorization.
All users must read the operating instructions for the system they work with.
All users must be familiar with all accessible functions of the product.
Describes the CX1020 as a scalable, modular control system for top-hat rail installation.
Details the CX1020's PC technology, modular I/O, CPU performance, and EtherCAT integration.
Explains expandability, power supply, memory options, and operating system choices.
Lists available optional interface modules for the basic CX1020 CPU module.
Describes available fieldbus interface modules as master and slave versions.
Provides detailed technical specifications for the CX1020 basic module.
Provides detailed technical specifications for the CX1030 basic module.
Lists available hardware and software variations for CX1020 basic CPU modules.
Lists available hardware and software variations for CX1030 basic CPU modules.
Details the pin assignment and schematic structure of Ethernet ports.
Describes the DVI-I and USB interfaces on basic CPU modules.
Information on LED indicators, Compact Flash slot, and PC 104 Bus.
Details the CR2032 battery type and its specifications.
Explains the operation and handling of the Compact Flash slot.
Instructions for removing and replacing the fan cartridge.
Information on the LC Display of power supply units for system messages.
Lists memory addresses and descriptions for various adapter RAM modules.
Details the PC 104 Bus pin assignments and relevant remarks.
Overview of CX1020 system interfaces (N010 to N060) and their technical data.
Details connections for DVI-I, USB, and audio interfaces.
Explains RS232 and RS422/RS485 serial interface connections and parameters.
Details the RJ45 interface and mounting position for the CX1020-N060.
Provides technical specifications for CX1100-0001, -0002, -0012, -0003, -0013, -0004, -0014.
Details the connections and LEDs for CX1100 power supply units.
Instructions for unpacking, handling, and transporting the device to prevent damage.
Describes module dimensions, assembly, and top-hat rail mounting.
Details UPS modules and CX1500 fieldbus connection modules.
Step-by-step guide for assembling basic modules onto the top-hat rail.
Instructions for installing fieldbus connections to the basic CX1020 module.
Explains how to connect the cooling element to ground for proper operation.
Covers switching the PC on and off, including correct shutdown sequence.
Notes on using the BIOS setup utility and its top menu structure.
Menu for setting date, time, graphics mode, and startup behavior.
Configuration of IDE interfaces for hard disk settings.
Settings for CPU behavior, boot devices, and system performance.
Configuration menu for USB, audio, and serial interfaces.
Menu for configuring ACPI functions and power saving settings.
Configuration for PCI bus and Plug and Play management.
Displays CPU, motherboard temperatures, power supply, and fan speed.
Settings for PCI bus clock and power supply tolerances.
Explanation of LEDs on the CPU module for status indication.
Details LEDs and error codes for CX1100 power supplies and K-Bus/IP-Link.
Explains LEDs on CX1100-0004/0014 power supplies for E-Bus and EtherCAT status.
Lists common faults, their causes, and recommended correction measures.
Procedure for dismantling the CX10x0 hardware configuration.
Steps for separating individual modules and proper disposal of electronic parts.
Lists available accessories like compact flash cards, adapters, and labels.
States that products are CE, UL, and GOST-R certified.
Information on Beckhoff's support, branch offices, and service contacts.
To Next Page
