Product overview
Embedded PC 15
Configurations
The Basic CPU-Module can be ordered with different hardware and software variations. As operating systems there
are "Windows CE.NET" and "Windows XP Embedded" available. The TwinCAT automation software transforms a
CX1020 system into powerful PLC and Motion Control system that can be operated with or without visualisation.
The order identifier of the basic CPU module is derived as follows:
Following CX1020 configurations are available:
Ordering
information
DVI /
USB
no
operating
system
Windows
CE
Windows
XPE
no
TwinCAT
TwinCAT
PLC
Runtime
TwinCAT
NC PTP
Runtime
TwinCAT
NC I
Runtime
CX1020-0000 - X - - X - - -
CX1020-0010 - - X - X - - -
CX1020-0011 - - X - - X - -
CX1020-0012 - - X - - - X -
CX1020-0013 - - X - - - - X
CX1020-0100 X X - - X - - -
CX1020-0110 X - X - X - - -
CX1020-0111 X - X - - X - -
CX1020-0112 X - X - - - X -
CX1020-0113 X - X - - - - X
CX1020-0020 - - - X X - - -
CX1020-0021 - - - X - X - -
CX1020-0022 - - - X - - X -
CX1020-0023 - - - X - - - X
CX1020-0120 X - - X X - - -
CX1020-0121 X - - X - X - -
CX1020-0122 X - - X - - X -
CX1020-0123 X - - X - - - X
CX1020 Systems with Windows XP Embedded require a Compact Flash card with a capacity of al least 1 GB.
Note:
For detailed information about the software images see the CX10x0 Software Documentation.
To Next Page
Loading...
Need help?
General
