Product overview
16 Embedded PC
Configurations
The Basic CPU-Module can be ordered with different hardware and software variations. As operating systems there
are "Windows CE.NET" and "Windows XP Embedded" available. The TwinCAT automation software transforms a
CX1030 system into powerful PLC and Motion Control system that can be operated with or without visualisation.
The order identifier of the basic CPU module is derived as follows:
Following CX1030 configurations are available:
Ordering
information
DVI /
USB
no
operating
system
Windows
CE
Windows
XPE
no
TwinCAT
TwinCAT
PLC
Runtime
TwinCAT
NC PTP
Runtime
TwinCAT
NC I
Runtime
CX1030-0000 - X - - X - - -
CX1030-0010 - - X - X - - -
CX1030-0011 - - X - - X - -
CX1030-0012 - - X - - - X -
CX1030-0013 - - X - - - - X
CX1030-0100 X X - - X - - -
CX1030-0110 X - X - X - - -
CX1030-0111 X - X - - X - -
CX1030-0112 X - X - - - X -
CX1030-0113 X - X - - - - X
CX1030-0020 - - - X X - - -
CX1030-0021 - - - X - X - -
CX1030-0022 - - - X - - X -
CX1030-0023 - - - X - - - X
CX1030-0120 X - - X X - - -
CX1030-0121 X - - X - X - -
CX1030-0122 X - - X - - X -
CX1030-0123 X - - X - - - X
CX1030 Systems with Windows XP Embedded require a Compact Flash card with a capacity of al least 1 GB.
Note:
For detailed information about the software images see the CX10x0 Software Documentation.
To Next Page
Loading...
