What to do if Beckhoff Controller computer boots, software starts, but control does not operate correctly?
If the Beckhoff Controller computer boots, and the software starts, but the control does not operate correctly, the cause of the fault is either in the software or in parts of the plant outside the Industrial PC. In this case, contact the manufacturer of the machine or the software for assistance.
What to do if Beckhoff Controller Industrial PC functions only partially?
If the Beckhoff Controller Industrial PC functions only partially or only part of the time, for example, if there is no picture or a dark picture, but the disk drive responds when switching on, this may indicate defective components in the Industrial PC. Contact Beckhoff Service for support.
What to do if Beckhoff Controller Industrial PC does not boot fully?
If the Beckhoff Controller Industrial PC does not boot fully, this may be due to incorrect setup settings. Check the setup settings. If the issue persists, contact Beckhoff Service.
What to do if Beckhoff Controller shows memory device access error?
If you encounter a memory device access error with your Beckhoff Controller, it indicates a faulty device. Contact Beckhoff Service for assistance.
Why nothing happens after the Beckhoff Controller Industrial PC has been switched on?
If nothing happens after the Beckhoff Controller Industrial PC is switched on, it could be due to no power supply to the Industrial PC or some other cause. Check the power supply cable. If the problem persists, contact Beckhoff Service.
Details on documentation, liability, trademarks, patents, copyright, and delivery.
Explanation of safety symbols used in the manual for hazard warnings.
Essential safety guidelines for operating and handling the Industrial PC.
Defines operator duties, required qualifications, and diligence for safe operation.
Covers appropriate use, application, and general configuration of the C6930.
Instructions for accessing battery, hard disk, CF/CFast cards, with safety warnings.
Details on status LEDs and information on the fan cartridge for cooling.
Information on extending the PC with PCI and PCIe plug-in cards.
Description of various interfaces like Power, Network, USB, DVI, Serial, and expansion slots.
Guidelines for safely transporting, unpacking, and checking the Industrial PC.
Procedures for mounting the PC in a control cabinet, including ventilation and environment.
Instructions for establishing proper earthing connections for interference dissipation.
Details on connecting the 24 VDC power supply, UPS, and innovative shutdown.
Pinout details for the 8-pole connector used for power, battery, and switching.
Instructions and materials for fitting cables and assembling connectors.
Covers power connection details, PC shutdown configuration, and battery service life.
Description of the UPS output for control panels and its operational function.
Diagram illustrating the external switch and power supply wiring.
Procedures for connecting devices, power supply plugs, cables, and voltage checks.
Instructions for switching the Industrial PC on, off, and safe shutdown procedures.
Guide for first-time startup, operating system, and driver installation.
Covers cleaning, servicing, battery replacement, emergency response, and disposal.
Steps for installing UPS driver software and accessing help files.
Lists common faults, their causes, and recommended correction procedures.
Provides details for Beckhoff branches, headquarters, support, and service centers.
Dimensional drawings and assembly orientation for the standard C6930.
Dimensions and orientation for C6930 with a side mounting plate.
Dimensions and orientation for C6930 equipped with plug-in card slots.
Dimensions for C6930 with both side mounting plate and plug-in card slots.
Detailed technical specifications including dimensions, weight, environmental, and electrical data.
Information on FCC and Canadian compliance statements for the device.
General| Category | Industrial PC |
|---|---|
| Processor | Intel Core i7 |
| USB Ports | 4 x USB 3.0 |
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Display | No display |
| Graphics | Intel HD Graphics |
| Ethernet | 2 x Gigabit Ethernet |
| Display Ports | 1 x DisplayPort, 1 x DVI-D |
| COM | 2 x COM ports |
| Audio | Line-in, line-out |
| Operating System | Windows 10 IoT Enterprise |
To Next Page
