Beckhoff CX8080 - 3 Mounting and wiring; 3.1 Mounting

Mounting and wiring
3 Mounting and wiring
3.1 Mounting
3.1.1 Dimensions
The following drawings show the dimensions of the CX80xx Embedded PCs.
Dimensions

Drawings in various CAD formats can be found at: http://www.beckhoff.de/german/download/cx1000.htm
3.1.2 Installation on mounting rails
Snapping onto the mounting rail
The CX80xx can simply be snapped onto the mounting rail. To this end simply position the block on the
mounting rail and push it slightly until it engages on the right-hand side. The is indicated by a distinct click.
Use a screwdriver to push up the lock on the left-hand side, thereby turning it and causing it to engage
audibly.
Attention
Avoid damage!
Do not force the module or apply excessive pressure!
CX8080 13Version: 1.0.0