Parameterization and commissioning
RS232
Please use these files for offline configuration. The offline file contains two tsm files, one for the K-bus
interface, and one for E-bus interface. http://infosys.beckhoff.com/content/1033/cx8080_hw/Resources/
zip/2495103243.zip
Protocols
KS8000 protocol for operation of the Bus Coupler BK8100 or BK8000
Both interfaces can be used as BK8xx0 master. It is an open Beckhoff protocol, which should be used for the
products BK8100 RS232 or BK8000 RS485. The protocol is already implemented, and you can address the
couplers directly.
CX808028 Version: 1.0.0
To Next Page
Loading...
