Appendix
Update the MicroSD card
A MicroSD card reader is required for this!
• Remove the MicroSD card from the switched-off CX device.
• Insert the MicroSD card into the reader
• Delete all files (we recommend that you backup all files first), no formatting
• Load the new image
• Wait until copying has finished, then remove the MicroSD card
• Insert the MicroSD card into the SD slot of the switched-off CX again
• Now switch on the CX again; it may take a little longer the first time
CX808066 Version: 1.0.0
To Next Page
Loading...
Need help?
General
