Installation
6.
The teaching process can now be stopped by repeating the command “Online Write”.
7.
The process is now stopped. This display window also shows that the technical data of modules 1, 2
and 3 are invalid, because they were excluded from the teaching process.
8.
Now, all movers are manually pushed to motor modules 7, 8 and 9. The previously excluded motor
modules 1, 2 and 3 can now take part in the teaching process. Since the movers are now on modules
7, 8 and 9, these modules are now also excluded from teaching.
eXtended Transport System Start-Up36
Version: 1.2
To Next Page
Loading...
