Need help?Do you have a question about the Beckman Coulter AutoMate 2500 series and is the answer not in the manual?
General| Module Options | Sorter |
|---|---|
| LIS Connectivity | Yes |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 15°C to 30°C |
| Operating Humidity | 20-80% non-condensing |
Explains warning symbols like Caution, Important, Note, and Tip.
Details safety rules and guidelines for operating the system.
Information regarding regulatory compliance and disposal.
Defines the system's intended application and prohibited uses.
Outlines owner duties and the system's risk analysis compliance.
Explains the meaning of various safety labels on the system.
Describes the purpose and scope of the manual.
Identifies the intended audience and operational staff roles.
Lists available configurations and optional features of the system.
Provides a glossary of technical terms and abbreviations used.
Provides an overview of the AutoMate system and its components.
Details the correct procedure for placing racks on the base frame.
Explains how to operate and manage the system's drawers.
Describes sample handling, tube status, and rejected tubes.
Covers system specifications for pump, pipette tips, and tubes.
Covers the GUI, system menus, program options, and components.
Details operating options, drawer controls, and system status indicators.
Outlines steps and checks for starting the system and its components.
Covers distribution, workplace info, tube handling, and rack info.
Details aliquot module functions, printer operations, and consumables.
Explains MTP operations, rack information, and troubleshooting.
Covers maintenance introduction, safety precautions, and operation sequence.
Details system cleaning, recommended disinfectants, and prohibited agents.
Provides a schedule for periodic maintenance tasks.
Covers maintenance for the decapper, waste hopper, and gripper jaws.
Details cleaning and maintenance of conveyor belts and tube holders.
Covers replacing aliquotter syringe, pipettor, and TTU module.
Details compressor types, depressurization, resume operation, and oil checks.
Covers cleaning the printer, rollers, printhead, and label sensor.
Lists spare parts and consumables for the system.
Explains the built-in maintenance counter for service scheduling.
Introduces the recapper's function, design, and Parafilm handling.
Explains the recapper control panel, LEDs, buttons, and shift functions.
Details the steps for replacing the Parafilm film cassette.
Covers cleaning, inspecting components, and troubleshooting common issues.
Provides general guidance on resolving system errors and initialization issues.
Addresses errors related to robot grippers and volume detection during initialization.
Details troubleshooting steps for power outages and system freezes.
Covers issues with aliquot module, label printer, and aspiration errors.
Addresses tube jams in the hopper and fragments in the TTU module.
Details troubleshooting for camera issues and Microtiter Plate errors.
Lists other relevant documentation for the AutoMate 2500 Family.
To Next Page
