Headboard brackets are an optional accessory and are not included.
A 1/2'' (13 mm) socket and 1/2'' (13 mm) crescent wrench are necessary to complete installation.
HEADBOARD BRACKET COMPONENTS
STEP 1
STEP 3
STEP 2
The headboard bracket will have 2 long slots to accomodate any
frame type. Align the appropiate slots on the bracket with the holes
on the bed. Use long bolts and nuts to secure the bracket. Make
sure the bolts are tight.
You may now connect your headboard to the attachment plates using the remaining short bolts and nuts to secure it to the brackets. The heads
of the bolts will face outward. Use a 1/2" (13 mm) socket and 1/2" (13 mm) wrench to tighten the bolts.
To put the T-Bracket and Headboard Bracket together, you will
need (2) short bolts and (2) nuts. Slip the bolts through the holes
from T-Bracket to Headboard Bracket with the head of bolt facing
outward. Use 1/2'' (13mm) socket and 1/2'' (13mm) wrench to
tighten the bolts.
—13—
(2) Headboard Brackets (2) T-Brackets (4) Short Bolts (12) Nuts (8) Long Bolts
Headboard Bracket Installation Guide
Customer Service: 1-855-430-8943
To Next Page
Loading...
