bedTech BT6500 - User Manual

Questions and Answers

K
kcampbellAug 3, 2025
What to do if no features of my bedTech BT6500 will activate?
- O
  omarperkinsAug 3, 2025
  If no features of your bedTech Indoor Furnishing power foundation are working, the surge protection device or the electrical outlet might be faulty. First, try programming the remote control. If that doesn't work, unplug the power cord, wait 30 seconds, and plug it back in to reset the electronic components. Test the outlet by plugging in another working appliance. Also, check that the connector on the wired remote control is securely attached to the control box.
C
Christopher Mendoza MDAug 7, 2025
How to fix bedTech Indoor Furnishing when remote illuminates but won't activate bed?
- K
  Kevin HoAug 7, 2025
  If the remote control for your bedTech Indoor Furnishing lights up but doesn't activate the bed, make sure the power cord is plugged into a working, grounded electrical outlet. You can test the outlet by plugging in another working appliance.
C
Christian CoxAug 12, 2025
What to do if head or foot of bedTech Indoor Furnishing elevates but won't return to horizontal?
- L
  Laura HunterAug 12, 2025
  If the head or foot section of your bedTech Indoor Furnishing elevates but doesn't return to the horizontal position, the bed mechanism may be obstructed. Elevate the bed and check for any obstructions, then remove them. Also, the head section may be too close to the wall, or the headboard may be too close to the edge of the mattress. Ensure there is enough distance between the headboard brackets and the mattress, and adjust if needed.
K
Karen MahoneyAug 15, 2025
Why won't my bedTech BT6500 wireless remote illuminate?
- C
  Cassandra HernandezAug 15, 2025
  If the wireless remote for your bedTech Indoor Furnishing doesn't light up, try replacing the batteries.
C
Cassandra LeeAug 19, 2025
How to reduce massage motor noise in bedTech BT6500?
- Z
  Zachary WallaceAug 20, 2025
  If the massage motor on your bedTech Indoor Furnishing is making excessive noise, ensure that the power foundation is not positioned against a wall, nightstand, or any other object that may be causing the vibration or noise.
A
Aaron FreemanAug 25, 2025
What to do if massage motor overheats or stops on bedTech Indoor Furnishing?
- C
  Colton GarciaAug 25, 2025
  If the vibration motor overheats on your bedTech Indoor Furnishing, the thermal protection will turn the motor off. Wait 30 minutes, then turn the massage back on. If it still doesn't come on, turn it off and report the situation to customer service.
L
lopezericAug 28, 2025
Why is there a clicking noise when raising or lowering bedTech Indoor Furnishing?
- S
  Sheri Bruce MDAug 28, 2025
  If you hear a clicking noise under the bedTech Indoor Furnishing when raising or lowering it, no action is required.

Summary

Safety & Warranty Warnings

Product Rating

Details the operational duty cycle for motors to prevent warranty voidance and ensure longevity.

Operating Information

Provides guidance on safe and effective operation, including moving parts and weight distribution.

Hospital Use Disclaimer

Clarifies that the product is for residential use only and does not meet hospital standards.

Weight Limits

Specifies the maximum weight capacity and the importance of even distribution to prevent damage.

FCC Compliance

Outlines the device's compliance with FCC rules regarding interference and exposure.

Bed-Tech Warranty

Explains the terms, duration, and coverage for adjustable bases, including exclusions.

Additional Terms and Exclusions

Details conditions that void the warranty and limitations on liability for damages.

Parts List

BT6500 Electronics Quick Reference Guide

BT6500 Wireless Overview

Illustrates and labels the main electronic components and connection points of the BT6500 adjustable base.

Installation Guide

BT6500 Remote Control Instructions

One Touch Buttons

Explains the function of each one-touch preset button on the remote control for various bed positions.

Massage Feature

Details how to use the head and foot massage functions, including intensity and mode selection.

BT6500 Bluetooth Instructions

Setting Programmable Positions and Pairing Remote

Setting Programmable Positions

Guides users on how to save custom positions using the remote control's memory functions.

Pairing Remote

Provides instructions for pairing the remote control with the adjustable base if it is not pre-paired.

Synchronizing Two Bases

Headboard Bracket Installation Guide

Headboard Bracket Components

Lists and illustrates the necessary components required for installing headboard brackets.

Troubleshooting

bedTech BT6500 Specifications

General

Brand	bedTech
Model	BT6500
Category	Indoor Furnishing
Language	English

Related product manuals

bedTech BT6500 - User Manual

Table of Contents

Questions and Answers

Summary

Safety & Warranty Warnings

Product Rating

Operating Information

Hospital Use Disclaimer

Weight Limits

FCC Compliance

Bed-Tech Warranty

Additional Terms and Exclusions

Parts List

BT6500 Electronics Quick Reference Guide

BT6500 Wireless Overview

Installation Guide

BT6500 Remote Control Instructions

One Touch Buttons

Massage Feature

BT6500 Bluetooth Instructions

Setting Programmable Positions and Pairing Remote

Setting Programmable Positions

Pairing Remote

Synchronizing Two Bases

Headboard Bracket Installation Guide

Headboard Bracket Components

Troubleshooting

bedTech BT6500 Specifications

Related product manuals