—08—
Press and hold head lift and foot lift simultaneously, then press and
hold the button on the cord of control box for 3 seconds until your
hear 2 beeps sound, the remote is then paired.
SETTING PROGRAMMABLE POSITIONS
PAIRING REMOTE
The wireless power bed has a programmable feature that allows you to save custom positions.
Please read all the instructions below before setting your custom presets on the remote.
STEP 1
STEP 2
STEP 3
Adjust the head and foot to your desired position.
To adjust the saved position, repeat steps 1 and 2 and the new
position will be saved.
STEP 1
them when needed.
The original remote that comes in the box is already paired to the foundation. No further action is required.
In the event that the remote is not paired with the foundation, follow the steps below.
press and hold memory button for 5
seconds until you hear 2 beeps sound.
STEP 3
STEP 2
Plug the power cord to
the power source.
Se rogrammable P Pairing Remote
Pairing Button
Customer Service: 888-236-3044
FLAT
To Next Page
Loading...
