—09—
Synchronizing Two Bases
SYNCHRONIZING TWO BASES
STEP 1
STEP 4
STEP 2
STEP 3
Plug A and B bases to power source.
Pair remote A to Base B, then base A and base B can be
simultaneous operated by Remote A.
Make sure remote A was already paired to Base A and Remote
B was paired to Base B. If not, please pair them by following the
pairing remote instructions on page 08.
Base B
Base A
Base B
Base A
P
a
irin
g
Remote A
Remote BRemote A
Press and hold head down and foot down buttons on remote B, at the same time (simultaneously) press and hold head up and foot up buttons
beds simultaneously.
Note: If you want to operate the beds separately, press and hold and beside Tilt on remote B; then the flash light will be on, and the
remote B has been separated from the remote A.
Remote B Remote B Remote BRemote A
Customer Service: 888-236-3044
To Next Page
Loading...
