Section VIII BEECHCRAFTBonanza
Handling. Serv - Maint V35, V35A & V35B thru D-9947
Oily spots may be cleaned with household spot removers,
used sparingly. Before using any solvent, read the in-
structions on the container and test it on an obscure place
on the fabric to be cleaned. Never saturate the fabric with a
volatile solvent; it may damage the padding and backing
materials.
Soiled upholstery and carpet may be cleaned with foam-
type detergent used according to the manufacturer's in-
structions. To minimize wetting the fabric, keep the foam
as dry as possible and remove it with a vacuum cleaner.
The plastic trim, instrument panel, and control knobs need
only be wiped with a damp cloth. Oil and grease on the
control wheel and control knobs can be removed with a
cloth moistened with isopropyl alcohol. Volatile solvents,
such as mentioned in the article on care of plastic
windows should never be used since they soften and craze
the plastic.
ENGINE
Clean the engine with neutral solvent. Spray or brush the
fluid over the engine, then wash off with water and allow
to dry.
8-30
CAUTION
Do not use solutions which may attack rubber
or plastic. Protect engine switches, controls,
and seals; fluid applied at high pressure can
unseat seals. resulting in contamination of the
sealed systems.
January 1982
To Next Page
Loading...