Beem 351201 - Page 28

EN 28
Making Coffee with a Preset Time
To make coffee with a preset time, the clock needs to be set (see the “Handling and
Operation” chapter – “Time”).
1. Prepare the coffee machine, pour in coffee beans or coffee powder, pour in water and
insert a fi lter (see the “Handling and Operation” chapter).
2. Set the desired number of cups with the button
(25) (see the “Handling and Opera-
tion” chapter – “Setting the Number of Cups”).
3. For making coffee with coffee powder, press the
button (24) before the timer is set.
The
symbol (14) appears on the display (7).
4. Keep the TIMER button (20) pressed down for approx. 3 seconds until the indicator
time(16) fl ashes on the display.
5. Use the H (23) and M (21) buttons to set the start time you want (see the “Handling and
Operation” chapter – “Time”).
For making coffee with coffee beans, use the
button (19) to set the coffee strength
you want.
6. If you wish, switch on the aroma plus function using the
button (see the “Handling and
Operation” chapter – Aroma Plus Function”).
7. To activate the preset time, press the TIMER button again. The
symbol (15) appears
on the display. The preset time is activated.
Once the preset time is reached, the device switches on automatically. The operating lamp
lights up and the
(17) symbol fl ashes on the display.
If the indicator on the display should stop fl ashing even though the setting has not yet
been completed, press the TIMER button again for around 3 seconds. The indicator on
the display fl ashes again and the settings can be resumed.
Deactivating the Preset Time
To deactivate the preset time setting, press the TIMER button (20). The symbol (15)
goes out and the programming is deactivated. However, the preset time is retained and can
be reactivated at any time until a new preset time is programmed in or the device has been
disconnected from the power supply.