Beem 351201 - Making Coffee with Coffee Powder

27 EN
8. Set the desired coffee strength with the button (19) (see the “Handling and Operation”
chapter – “Setting the Coffee Strength”).
9. If you wish, switch on the aroma plus function using the
button (see the “Handling and
Operation” chapter – Aroma Plus Function”).
10. Press the button
(18) to switch on the grinder and start the brewing process. The
operating lamp fl ashes. Freshly ground coffee is transported through the grinder shaft into
the fi lter and then hot water is poured over it to brew it.
If the brewing process is to be aborted prematurely, press the
button. The operating
lamp goes out and the device is switched off.
At the end of the brewing process, three beeps will be heard and the device automatically
switches on the hotplate (see the “Handling and Operation” chapter – “Keep-Warm Func-
tion”).
Making Coffee with Coffee Powder
1. Fill the water tank (11) (see the “Handling and Operation” chapter – “Filling the Water
Tank ”).
2. Open the fi lter compartment (5).
3. Insert the permanent fi lter (see the “Handling and Operation” chapter – “Inserting the
Filter”).
4. Add the quantity of coffee powder you want to the fi lter using the measuring spoon which
is supplied with the device or another suitable spoon. We recommend one heaped spoon
for each 125 ml cup.
5. Close the fi lter compartment.
6. Set the desired number of cups with the button
(25) (see the “Handling and Opera-
tion” chapter – “Setting the Number of Cups”).
7. If you wish, switch on the aroma plus function using the
button (see the “Handling and
Operation” chapter – Aroma Plus Function”).
8. Press the
button (24). The symbol (14) appears on the display. The grinder shaft
is not opened when the brewing process starts.
9. Press the button (18) to start the brewing process. The operating lamp fl ashes. Hot water
is poured over the coffee to brew it.
If the brewing process is to be aborted prematurely, press the button. The operating
lamp goes out and the device is switched off.
At the end of the brewing process, three beeps will be heard and the device automatically switch-
es on the hotplate (see the “Handling and Operation” chapter – “Keep-Warm Function”).