Beeper RW037-P User Manual

25
6. CAMERA INSTALLATION
GROUND
GROUND
Camera can be placed in 2 positions on the car
The spacers provided may be used to correct the curves and angles of the body (see next page).
TOP PLACE • HORIZONTAL CAMERA
The camera is positioned on the uppermost part of the body, close to
the horizontal center of the vehicle. The camera is then in horizontal
position. The axis of the threaded rod should be strictly parallell
relative to the ground.
LOW PLACE • VERTICAL CAMERA
The camera is positioned over the license plate without
obscuring. The camera must be close to the horizontal
center of the vehicle. The camera is then in a vertical
position. The axis of the threaded rod of the camera
must be strictly perpendicular
relative to the ground.

Beeper RW037-P Specifications

General

Brand	Beeper
Model	RW037-P
Category	Automobile Accessories
Language	English