Important information for Burn-in/Ghosting
Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh
application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period
may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen.
“Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or
“after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
Warning
Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost
image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered by the warranty.
Service
Repairs from a person besides an engineer or partner of Beetronics B.V. will nullify any warranty claim. Remodeling or opening the
product by the customer will nullify any warranty claim.
Warning
Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the
operating instructions given in this manual have been followed.
SAFETY PRECAUTIONS & MAINTENANCE
06 EN
To Next Page
Loading...
Need help?
General
