Safety precautions & maintenance
Operation
Please keep the monitor out of direct sunlight, very bright lights and away from any heat source.
Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.
Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
Do not block the ventilation holes on the casing.
If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power
cord and resuming operation.
Please use approved power cord provided by Beetronics at all times. If your power cord is missing, please contact your local Beetronics
office.
Do not subject the monitor to severe vibrations or high impact environments during operation.
Do not knock or drop the monitor during operation or transportation.
Maintenance
To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, hold the frame
to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.
Unplug the monitor if you are not going to use it for an extended period of time.
Unplug the monitor during cleaning. Clean with a damp cloth. Wipe the screen dry with a clean cloth. However, never use organic solvent,
such as, alcohol, or ammonia-based liquids to clean your monitor.
To reduce the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessively humid
environments.
If your monitor gets wet, wipe it with a dry cloth as soon as possible. If a foreign substance or water gets in your monitor, please turn the
power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance
center.
Do not store or use the monitor in locations exposed to extreme heat, direct sunlight or extreme cold.
In order to maintain the best performance of your monitor and maximize its lifetime, please use the monitor in a location that falls within
the recommended temperature and humidity ranges:
Temperature range: -15°C et +60°C
Humidity level: 20-80%
SAFETY PRECAUTIONS & MAINTENANCE
05 EN
To Next Page
Loading...
Need help?
General
