English ⋅ Nautilus
®
CC plus
49
86105 BA-en/00
The chamber is evacuated during preheating.
The preheating may last for up to 60 seconds.
NAUTILUS
®
alerts the operator with an acous-
tic signal and a message on the display that
the preheating process has ended.
7. Have the mould readily available before press-
ing the "OK" button to prevent the alloy from
cooling down unnecessarily. Preheating tem-
perature and vacuum are maintained until
then.
8. Close the mould door.
The next display is shown when the mould
door is closed.
Risk of burns!
Use mould tongs!
To Next Page
Loading...
Need help?
General
